TW Audio VERA20, Руководство по эксплуатации

Страница: 8 / 16

Operation manual VERA20
8
2.2. Variants – Horn flanges horizontal coverage 80° / 120°
The VERA20 loudspeaker can optionally be equipped with 80° or 120° horn flanges. The
angle specification refers to horizontal coverage. Check the rear rigging to identify the
VERA20 variant.
The factory installed horn flange type is marked on the VERA20’s rear rigging. Depending
on your application, it may be advantageous to change the horn flange. In this case, the
identification mark on the rear rigging should also be changed. The factory marking can be
removed using acetone.
Figure 2.2 – VERA20 horn flange variants