TW Audio VERA20, Руководство по эксплуатации

Страница: 10 / 16

Operation manual VERA20
10
4. Setup
4.1. VERA20 Setup
The VERA20 speaker has been designed for horizontal operation in stacked and flown
vertical arrays. TW
AUDiO offers various accessories for this application, such as
VERA RF600, SFV20, GSP20, etc.
Make sure the speakers are securely fastened to prevent personal injury and property
damage. Secure stacked loudspeakers properly so that they can be tilted by 10° in any
direction without toppling.
TW AUDiO recommends using only the accessories specified by TW AUDiO for securing
and mounting loudspeakers.
4.2. Rigging VERA20
VERA20 series line arrays can include VERA20 and/or VERA S32 or VERA S17 loudspeakers.
Please note that multiple VERA20 loudspeakers have to be connected to each other
mechanically. To connect speakers to each other, use the front and rear rigging tracks on
the left and on the right side (see Figure 2.1 - Position 4) and the rear rigging (see Figure
2.1 – Position 11). The rear rigging is an integral part of the VERA20 loudspeaker, and its
components can be unfolded or moved.
Further information on system assembly and disassembly can be found on the TW AUDiO
website.
Ease Focus simulation software can be used to plan VERA20 line arrays. Ease Focus is
available as a free download from the TW AUDiO website at
www.twaudio.com .