TVU Transceiver & Receiver Set Up and Operating Guide
v5.5
46
must be recharged using an external charger. Allow time for TVUPack to boot up
and optimize the cellular links for broadcast.
a)
Ensure that you have a secure connection to your video source at the Video
Input BNC connector on the left side of the TVUPack transmitter.
b)
Set TVUPack to begin live video streaming.
7.
Check the RF connections on the receiver to ensure RF link. The RF link is always
active due to TVU’s Inverse Statmux video transport technique. Video will not be
sent until the connection protocol is recognized by the TVUPack transceiver.
8.
Once you have configured the LGR to operate with the TVU Pack system, check
the TVUPack receiver Monitor display. The Vislink module will be shown as
Interface 7, as shown in the example below.
9.
If a good link is made in the system, Interface 7 will be lit green and show data
transmission.
Figure 38
A
PPENDIX
C:
TVU
R
ECEIVER
TR3700
The TVU Transceiver is the companion decoder for all TVU transmitters and helps
broadcasters monitor all aspects of a live transmission, including bit-rate and latency.
The TR3700 model is slightly different from other TVU Transceivers because it allows for
