50
FRONT WHEEL REMOVAL AND REASSEMBLY
(Disc type)
1. Remove the axle nut (1) along with a washer.
2. Pull out the axle (2) from the front wheel.
3. Incase of disc brake model, remove spacers
from both side of the wheel. Incase of drum
brake model remove a spacer from right side of
the wheel.
4. Place a support below the frame to prevent the
vehicle from falling and lift the vehicle up.
5. Incase of drum brake model, dislocate the wheel
assembly along with the brake panel.
6. Separate the brake panel from the wheel and
take out the wheel.
7. Incase of disc brake model, carefully dislocate
the disc from the caliper assembly and slide the
wheel out.
8. Reverse the procedure for reassembling.
Always make sure that whenever the wheel is removed,
axle nut is properly re-tightened to the specified torque.
Warning
1
2
