17
HANDLE BAR RIGHT SIDE
1. Front brake lever
The front brake is applied while squeezing the front
brake lever gently towards the throttle grip. The brake
lamp glows on application of front brake.
4. Pass by switch
Press the switch to flash the head lamp high beam.
It is used to give signal to the vehicles coming from
opposite direction while overtaking other vehicles
during day. If the switch is pressed while the head
lamp is turned ON and glowing in high beam, there
will not be any change in the beam of head lamp.
5. Beam control switch
The head lamp beam (high/low) can be controlled by
pressing the beam control switch.
Press the switch towards ‘ ’ to turn-on the head
lamp high beam or press the switch towards ‘ ’ to
turn-on the head lamp low beam.
Warning
Since your vehicle is fitted with SBT brake system it is
essential to maintain the brake system in good condition.
Adjust the brakes system at regular intervals for the
proper working of SBT.
Head lamp glows only when the engine is in running.
Note
Warning
Always use the appropriate turn signal lamps when
you intend to change lanes or take turns. Be sure to
switch it ‘OFF’ after negotiating the lanes or turns. Use
appropriate head lamp beam ‘high / low’ as per the
traffic and road conditions for your safety and to avoid
inconvenience to other riders.
3
1
2
