TVS Racing Apache RTR 160, Руководство пользователя

Страница: 37 / 119

31
31
1. Speedometer
Indicates the vehicle speed in kilometer per hour
by default whenever the ignition is turned ‘ON’.
This can be changed to mile per hour. Change the
mode between kilometer per hour and mile per hour
using the mode and set switch buttons (refer page
no. 42 for changing the speed indication between
km/h and mph).
2. Side stand indicator ( )
The side stand warning indicator turns ‘ON’ to alert
you whenever the vehicle‘s side stand is deployed
(vehicle in parked condition).
If you leave the ignition key in ‘ON’ position and vehicle
is kept in gear without moving for more than 3 minutes,
an error message ‘CHECK SPEED SENSOR’ may scroll
which is normal.
If you notice an error message ‘CHECK SPEED SENSOR’
while the vehicle is in move, Contact nearest TVS Motor
Company Authorised Main Dealer / Authorised Dealer
for rectification.
Note
In geared condition, if the side stand is deployed the
vehicle will not start. In neutral condition, if the side
stand is deployed, the vehicle will start but as soon as
the gear is engaged the vehicle will switch off.
If there is an error in the side stand sensor, the indication
will blink and the vehicle will not start. In such a condition,
please visit the nearest TVS Motor Company Authorised
Main Dealer / Authorised Dealer.
Note
3. Turn signal indicator right ( )
Flashes when the right side turn signal indication is
activated.
4. Immobilizer indicator ( )
-NA-
5. Low fuel indication ( )
Blinks when the fuel level reaches to minimum safe
level. It glows continuously when the fuel comes
below minimum safe level.
NA - Not applicable for this model