Self maintenance procedure
ELECTRICAL
Head lamp bulb removal
To replace bulb
●
Remove the headlamp bulb holder ( A ) from reflector
housing which is located under the dash board.
●
Gently pull out the Rubber Boot (B) from reflector housing.
●
Un-lock the clip ( C ) by loosening the star screw using star
screw driver to take out the bulb assembly.
●
Push the bulb in and turn it in anti-clockwise direction to
remove the bulb from holder.
●
Push the new bulb in and turn it in clockwise direction to fit
new bulb.
●
Put back the clip & tighten the start screw. Assemble
Rubber boot & bulb Holder into reflector housing
Tail/brake/ rear turn signal lamp bulb
●
Loosen and remove screws holding the lens.
●
Remove lens. Push in and twist in anti clockwise direction
to remove bulb.
●
Replace bulb and assemble back in reverse order of
disassembly.
A
A
B
C
052
