47
47
5. If any clearance is found, turn the adjuster nut
(2) at the top side in the slot marked as ‘S’ in
clockwise direction until there is no clearance
between the bullet top (3) and the slot top (4).
Since the vehicle is fitted with Synchronised
Braking Technology (SBT) adjust the brakes with
additional care. If not it may result in brakes not
working properly
. Please contact TVS Motor Company
Authorised Main Dealer or Authorised Dealer for further
assistance.
Warning
1
2
6. After adjusting the adjuster nut top, If any
clearance is observed in between the bullet
bottom (5) and the slot bottom (6) marked as ‘I’
as shown, then turn the adjuster nut (2) in anti-
clockwise until there is no clearance.
7. Once again check and confirm the brake play at
the lever end.
Brake shoe wear indicator - Front
When the brake is applied, wear limit index mark (1)
on the front brake cam should be within the wear
limit indicator (2) on the front brake panel.
2
1
S
I
6
Clearance
Clearance
5