TVS Apache RTR 200 4V, Руководство пользователя

Страница: 47 / 118

34
Setting the digital display
Every press of the Mode button changes the display
to other mode. Follow the below procedures to
change the display to desired mode.
If ignition is turned ‘OFF’ when the meter is in ‘ODO’
or ‘TRIP’ meters, then the respective meters will be
displayed in the next ignition ‘ON’. If any other modes
other than these were set during ignition ‘OFF’, then
‘ ’ meter will be displayed in the next ignition
‘ON’.
1. In ‘ODO’ mode, press the Mode button once and
twice to enter ‘ ’ and ‘ ’ meters
respectively.
• To reset any of the trip meter while ensuring
the display is in ‘TRIP A’ or ‘TRIP B’, press and
hold the Set button for a few seconds.
2. In ‘TRIP B’ meter mode, press the Mode button
once to enter lap timer mode. On entering the
lap timer mode, a message ‘ ’
and last three laps timing will be displayed in the
cluster’s display.
• To reset the timings, keep the display in
‘LAP TIMER MODE’ and wait till the cluster
displays the lap timings. Now press and hold
the Set button for a few seconds.
On long pressing the Mode button, the following
modes can be accessed.
1. SET mph MODE / SET km/h MODE
2. CLOCK SETTING MODE
3. BLUETOOTH PAIRING MODE
Press
MODE
button on
speedometer
Pres
s
MOD
E
butto
n
o
n
speedometer
Pr
e
ss
MOD
E
butto
n
o
n
speedometer