TVS Apache RTR 200 4V, Руководство пользователя

Страница: 17 / 118

4
When you brake, bear in mind that ABS control
cannot always be relied on to prevent the rear wheel
from lifting clear of ground.
This ABS warning lamp goes ‘OFF’ once the bike
reaches 10 km/h speed and above incase of dual
channel vehicles or 7 km/h speed and above incase
of single channel vehicles and blinks whenever the
bike speed is less than 6 km/h speed (only in single
channel vehicles) indicating that the ABS is working
fine.
If the warning lamp glows continuously even after
the bike crossing the specified speed limits, then the
ABS has an error and your bike should be taken to
any of our nearest TVS Motor Company Authorised
Main dealer / Authorised Dealer.
Warning
The ABS can apply and release the pressure in the brake
circuit much faster than that rider can do with brake lever
/ pedal to avoid wheel locking. So there is no need to
pump the brake, it requires only continuous application.
Incase of single channel ABS system, only the front
brake of your motorcycle is fitted with ABS system
and not the rear brake. Applying rear brake alone can
cause wheel skidding just like normal braking system
incase of single channel ABS system. Always apply
both front and rear brake for better performance.
ABS warning lamp
The TVS Apache RTR 200 4V does an automatic
self check every time when the ignition switch is
turned ‘ON’. The ABS warning lamp provided at the
speedometer console blinks and informs you that the
ABS is under check.