KNOW YOUR TVS APACHE RTR 200 4V
28
3. Release and press the Mode button once again so
that the display enters ‘ ‘
mode.
2. Press and hold the Mode button for few seconds
till the display enters ‘SET mph MODE’ or ‘SET
kmph MODE’ (based on preferred setting).
MPH and KMPH setting
1. Ensure the display is in ‘ODO’ mode.
2. Press and hold the Mode button for few seconds
till the display enters ‘ ‘. Press
the Set button to select the MPH mode.
3. To change the display to KMPH mode again, press
and hold the Mode button til the display enters
‘ ‘. Press Set button to select
the KMPH mode.
1. Ensure the display is in ‘ODO’ mode.
Digital clock setting
If the display is set to MPH mode, it will switch to
KMPH mode by default whenever the ignition is
turned ‘OFF’ and ‘ON’.
Note
6. If the clock is in 24 hours format press the Mode
button once again to set the clock to 12 hours
format.
9. On pressing the Set button again the hours of the
clock is set and the minute digit blinks.
4. On pressing the Set button, if the clock is in 12
hours format, the hour format ‘AM’ or ‘PM’ blinks.
Else the clock will be ready for 24 hours format
selection.
7. Press the Set button again so that the hours digit
of the clock blinks.
10. Now, press the Mode button to increase the
minutes while minute digits are blinking.
5. Press the Mode button to change the hour format
‘AM’ or ‘PM’ or to change the clock to 24 hours
format.
8. Now, press the Mode button to increase the
hours while hour digits are blinking.
11. Press the ‘Set’ button once again to set hour
format and to come out from clock setting.
