32
Programming the Remote Control
The Digital TV recorder’s remote control can be programmed to operate certain TVs and DVD
players. Follow the procedure below to programme the remote control.
TEXT
INPUT
AD
SUB
Find the 4 digit code for brand of TV or DVD player from the brand codes, starting on page 39.
1.
If your brand is not included in the list or the codes for your brand do not operate your equipment, refer to the
following page for an automatic method of programming the remote control.
If you want to programme the remote control to operate a TV:
2.
Press the
[TV]
button.
If you want to programme the remote control to operate a DVD player:
Press the
[DVD]
button.
Press and hold the
3.
[ ]
button for approximately 3 seconds. The
[TV]
/
[DVD]
button flashes
twice.
Use the
4.
[0]
-
[9]
buttons to enter the 4 digit code for your brand. The
[TV]
/
[DVD]
button flashes
when every digit of the code is entered.
If a valid code has been entered, the
5.
[TV]
/
[DVD]
button will flash twice, quickly.
Check that the remote control operates your equipment by pressing the
6.
[1]
button. If not,
repeat the above procedure and try another code for your brand.
The codes you enter may be lost if weak batteries are not replaced immediately. Even if your TV/DVD brand is
listed in the code table, in some instances it may not be possible to operate all of the available functions.
TV
button
DVD
button
button
button
0-9
buttons
DTR-HV250 User Guide V2.indb 32
10/12/09 16:47:05
