20
Recording Programmes
Recording conflicts
Your Digital TV recorder can record up to two programmes at the same time.
If you attempt to record three or more programmes which overlap, you will be asked to either
select an alternative time to record the programme (Resolve conflict) or cancel the recording
request you have just made (Cancel timer).
You will then be presented with a list of all the programmes which overlap.
If one of the programmes is repeated later in the week then, when it is highlighted, the box will
give you the option to press the Green button (Alternative) to record the repeated programme
instead. If none of the programmes are repeated, simply delete one of the planned recordings by
pressing the
[RED]
button (Delete).
Note:
The Digital TV recorder will record programmes even if the programme is shown later than advertised e.g. due to a
•
previous programme overrunning. Please note, this is not applicable for timers set manually.
It is safe to put the Digital TV recorder into standby mode when you have set programmes to record. The Digital TV
•
recorder will automatically wake up from standby mode to make the recording.
The Digital TV recorder will also automatically add 3 minutes to the end of each recording to make sure the entire
•
programme is recorded. However, if any subsequent recording starts during those 3 minutes, then the first recording will
be stopped to allow the new recording to commence.
DTR-HV250 User Guide V2.indb 20
10/12/09 16:46:59
