Tvone MX-2522, Инструкция по эксплуатации

Страница: 7 / 9

5
5.0 OPERATING THE UNIT
FRONT
VIEW
6.0 TROUBLESHOOTING
Problems with the MX-2522 Matrix Switcher are rare. Most of the time, the problem is
caused by the use of an incorrect cable for the signal type, too long a cable run, bad
connectors on the cable or damaged cables.
Bad grounds or use of different AC power
sources for the MX-2522 Matrix Switcher, Signal Source and/or Display Device(s) may
also cause problems due to ground loops.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical
personnel be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com. Create a technical support request on the site and our
support team will respond within a short period of time.
Select
Status
Inputs A or B are directed to the desired output (1 or 2) by pressing the Select Buttons.
These are toggle buttons and will cause either Input A or Input B to appear on either
Output 1 or Output 2. By using the same procedure, both Outputs can be assigned to the
same Input. LEDs (Status) indicate your choice.
Inputs
Power
In Outputs
REAR VIEW