Tvone Magenta HD-One DX500, Руководство пользователя, Страница: 6 / 8

6 Setup and Installation
Setup and Installation
Cabling Considerations

For best performance, use one continuous F/UTP cable with as few breaks as
possible (i.e. patch bays, wall plates, or floor boxes).

tvONE recommends mounting and connecting all cables to the HD-One DX/ DX500
Series components before applying power.

Make sure that the Category cable you intend to use has been tested to comply with
the T568B wiring specification (See Appendix A).
Making the Connections
Connections and Setup in General
NOTE : All HD-One DX/DX500 units should be cabled and powered on prior to turning on the
video source device and display. It is recommended to cable and power on the HD-One
DX/DX500 units, then the display, and lastly the video source.
At the transmitter end:
1. Connect the video source to the HDMI INPUT port on the HD-One DX/DX500
transmitter, using an HDMI type A cable (if using DVI video, an HDMI to DVI adapter
is required).
2. Connect the Category cable to the HDBASET OUTPUT port on the transmitter.
3. Apply power to the transmitter.
At the receiver end:
1. Connect the display to the HDMI OUTPUT port on the HD-One DX/DX500 receiver,
using an HDMI type A cable (if using DVI video, an HDMI to DVI adapter is required).
2. Connect the Category cable to the HDBASET INPUT port on the receiver.
3. Apply power to the receiver.