Tvone Eclipse CS-450, Руководство пользователя

Страница: 30 / 68

PC Out - normal computer to video scan conversion.
Genlock - as PC Out, but synchronized to a video input.
Overlay - the converted computer video signal is superimposed on top of a video
input.
Mix - the converted computer video signal, and the video input, can be faded
between one another.
The MODE button on the unit illuminates when in genlock, overlay or mix mode.
This button can be pressed when the video image is frozen.
PLEASE NOTE that only one input (composite video or S-video) can be active at any
one time, and should be set prior to using the genlock/overlay/mix modes - see next
section "On-Screen Display". Otherwise, you may get a scrambled picture.
Detailed descriptions of each mode are in the "Using Genlock, Overlay, and Mix"
section.
KEY
This allows adjustment of the Key Level used when in Overlay mode.
Press the up-arrow key to increase this value, and the down-arrow key to reduce
it.
A higher value will mean that fewer colors (just the brighter ones) will be
overlaid.
A lower value will allow more colors to be overlaid.
Full details can be found in the "Using Genlock, Overlay, and Mix" section..
FADE
This will fade the converted computer signal in or out (toggling from one to the other).
The FADE button on the unit flashes when the image is faded out.
This button can be pressed when the video image is frozen.
Full details can be found in the "Using Genlock, Overlay, and Mix" section..
LOCK - External version only.
Pressing this button once will disable your Eclipse's front panel buttons. To re-enable th e
front panel buttons simply pr ess th e LOCK button again. This setting can be STOREd,
to prevent others from adjusting the unit without the remote control.
Pressing the button twice (within 1.5 seconds of each press) will lock both th e front-pan el
buttons an d th e remote control - use with care! This setting cannot be stored, because of
course the remote control (and buttons) are disabled by this time.
18
B
o
th
v
er
si
o
n
s