49
Source Switching
– On occasions it may be necessary to quickly switch between Inputs
without a transition. The default setting is ‘Fade through Black’. This means the current
source will fade out to ‘Black’ and the incoming source will fade in from ‘Black’ giving a
smooth transition.
The alternative setting for transitions is ‘Freeze and Cut’, which means the current source
will freeze the frame and the incoming source will cut in from the frozen image. To enable
this option, use the Source Switching drop-down menu to select ‘Freeze and Cut’ instead
of ‘Fade through Black’.
HDMI Found
– ‘
Found
’ is shown when an HDMI display has been connected and
acknowledged, ‘
Not_Found
’ is shown when the display is disconnected or not
compatible. This may be particularly useful when troubleshooting a system setup where
the display device is remote to the C3-340 via signal transmission equipment
12.7.3 Matrix View Video Routing
The CORIOmatrix is capable of routing or switching any video Input to any number of
Outputs. This can be one-to-one, one-to-many or one-to-all. Links from Inputs to Outputs
can be set up, cleared, blanked or muted either in real time or setup to happen
instantaneously in a batch of commands, then executing with a single command ‘
TAKE
’
function.
