Tvone C2-160, Руководство по эксплуатации

Страница: 62 / 100

C2-160 & C2-260 O
PERATION
M
ANUAL
56
11 WINDOWS CONTROL PANEL
A powerful utility is available for the C2 product range and can be downloaded from
our support web site or found on the Product CD (where supplied). To install the
application click on the setup file and follow the on screen instructions.
Once installed you will be able to control your unit via either Ethernet or Serial
(RS232) and be able to change and store all the settings of the unit.
11.1 Opening screens
When you start the application you will be presented with a splash screen showing
the product version number and then the main screen. The toolbar menu for
communications allows you to change the communications method that the
application will use
.
11.1.1 Selecting a serial port connection
Select the Communications item from the Communications toolbar. Then click the
“Serial” option on the popup window.
Figure 1 Communications – Serial
The application will support up-to 10 serial ports, all other parameters normally
associated with serial communications such as the baud rate are already
configured. The application works with a baud rate of 57600 baud only, you should
ensure that the baud rate is correctly set in the unit (System menu on the unit – see
8.10) before trying to connect.
11.1.2 Selecting an Ethernet connection
For units where an Ethernet port is provided, select the Communications item
from the Toolbar Communications. Then select the “Ethernet” option on the popup
window, the following options will be shown.
Figure 2 Communications - Ethernet