Tvone C2-160, Руководство по эксплуатации

Страница: 27 / 100

C2-160 & C2-260 O
PERATION
M
ANUAL
21
8 MENU LAYOUT AND SETTINGS ADJUSTMENT
This menu structure is available when the optional remote control is used to
activate the on-screen display function, where numerous settings can be adjusted.
If a remote control is not available, you should use the Windows Control Panel that
is present on the included CD – but note that this requires a spare RS232 port on
your computer. See the separate section later in this manual for more details.
From here on, we’ll be looking at the menu structure employed in the series and,
more importantly, the individual menu items that allow you to take advantage of the
power of the unit.
You’ll be using the – / SELECT / + buttons on the remote control (or L.CLICK /
D.CLICK / R.CLICK on the IRC-4) and the on-screen display (OSD) to view the
options and settings available to you. The OSD can be activated by pressing the
SELECT button once. The OSD will time-out and disappear after a few seconds of
inactivity by the user.
Whilst the OSD is active, use the – and + buttons to change where you are in the
menu. Go into a sub menu by pressing the MENU button once. To exit a sub menu,
scroll using the – and + buttons to the end of the sub-menu to reveal Exit. Push in
the SELECT button to exit the sub menu.
You can edit a value in brackets ‘[ ]’ by pressing the SELECT button once (you’ll
note that the brackets surrounding a particular parameter’s value will begin to
flash). Change the value by using the – and + buttons to decrease and increase
the value respectively. Then finalize your adjustment by pressing the SELECT
button once more.
A few menu items have multiple parameters within an individual menu selection. In
those cases, you can adjust one item, and then move to the next, etc.
Pressing the STORE button stores all changes in memory.
Unless you intentionally change it again later, the adjustment will
remain even after power is removed from the unit.
8.1 The High Level Menu Structure
Menus are arranged so that a particular general function has a menu name on the
top line and beneath that either a sub-menu or one or more related individual
settings are displayed.
In some cases the functionality is global – meaning it has an effect on the unit as a
whole (such as changing the output resolution). In the majority of cases, the