7
5.0
OPERATING THE UNIT
The 1T-VS-668 can be operated from either the front panel controls or via the included
Infrared Remote Control. Since Infrared is the control method used most often by the
majority of users, please take the time to familiarize yourself with the location and function
of the various control buttons on the Controller.
Front Panel Controls:
The front panel has controls to manually control the 1T-VS-668
Universal Presentation Switcher/Scaler.
1
POWER Button and LED:
Press this button to switch the device on or to set it to
standby mode. Once the device is connected to an active power supply and the
Power Switch on the back panel is turned on, the LED will illuminate and the device
will switch on automatically.
2
IR Receiver Window:
Receives only the IR signal from the remote control included
in the package.
3
INPUT Buttons and LEDs:
Press these buttons to switch directly to the required
source. An LED will illuminate to indicate the selected input source.
4
MENU:
Press this button to enter the On-screen Display (OSD) menu.
5
Plus/Minus (− / +) Buttons:
Press these buttons to navigate down and up in the
OSD menu.
6
ENTER:
Press this button to confirm the selection in the OSD menu.
NOTE: Press this button simultaneously with the “+” (plus) button to instantly switch the output to XGA resolution
or with the “−“ (minus) button to instantly switch the output to 720p resolution.
1 2 3 4 5 6
