6
4.2
1T-CT-652 Receiver
1.
At the remote location, connect the Cat.5e/Cat.6 cable to the Receiver’s HDBaseT
In port. Ensure that the RJ45 connector is securely locked into the receiver’s port.
2.
(OPTIONAL)
If there is an IR controllable device on the 1T-CT-652 side that you
wish to control remotely from the 1T-CT-651 side, connect the IR Emitter device to
the IR Tx connector on the 1T-CT-652. If there is an IR controllable device on the 1T-
CT-651 side that you wish to control remotely from the 1T-CT-652 side, connect the
IR Receiver device to the IR Rx connector on the 1T-CT-652.
3.
Connect the HDMI port of the Receiver to the HDMI input of the remote display or
other device, using an appropriate cable, (1 Meter (~3’) in length for 12 bit signals, 10
meters (~33’) for 8 bit signals).
4.
If using the RS-232 control feature, connect the RS-232 device to the 1T-CT-652 via
the DB-9 port.
5.
Connect the 5v AC power adapter’s DC power connector to the 1T-CT-652
Receiver.
6.
Turn on the remote display and source device. Observe the Link LEDs on the
Transmitter and the Receiver. Both should be lighted.