TVLogic XVM-175W, Руководство по эксплуатации

Страница: 8 / 44

8 Multi Format LCD Monitor
3. Controls & Functions
FRONT : XVM-175W
̻
[STANDBY] lamp
- It affords power supply, which may be
indicated by indication lamp. The lamp is
RED during power supply and GREEN during
system is in operation. In case of power cut
and sudden shut off of the power, our
monitor keep previous setup stage.
̻
[POWER] button
- Used to turn power on and off.
̻
[ANALOG] button/lamp
- Used to select desired Analog Input. Press
the button to activate the analog input
menu selection, then use UP and DOWN
button to select desired input.
̻
[PBP] button/lamp
- Used to select PBP(Picture-by-Picture) function.
̻
[SDI-A] button/lamp
- Used to select SDI-A input.
̻
[SDI-B] button/lamp
- Used to select SDI-B input.
̻
[SCAN] button/lamp
- Used to change the Scan mode. The mode is
changed as the following sequence.
OVER SCAN -> ZERO SCAN -> UNDER SCAN
-> 2:1 SCAN -> 1:1 SCAN -> FIT WIDTH -> USER
ASPECT
̻
[ASPECT] button/lamp
- Used when changing the monitor ratio on SD
signal mode to 16:9.
̻
[BLUE] button/lamp
- You may remove R(red) and G(green) from
the input signal and play the screen only in
B(blue) signal. And if the button hit twice,
it will turn to MONO mode. (This mode use
only luminance value.)
̻
[H/V DLY.] button/lamp
- Used when checking horizontal sync and
vertical sync simultaneously.
After applying Analog sync(CLK, H, V) check
whether the SYNC is corresponding with SDI,
Component, Composite modes.
̻
[C.Temp] button/lamp
- Used to change Color Temperature.
̻
[CHROMA] button
- Used when changing the CHROMINANCE
and PHASE values during menu in-activation.
One time of touch of the button will turn the
product to CHROMA mode, and if the button
is hit twice, to automatic PHASE setting.
(PHASE may be used only ANALOG mode.)
̻
[W/F] button/lamp
- Used to activate the Waveform and
Vectorscope.
̻
[MARKER] button/lamp
- Used to activate or inactivate the marker.
The desired aspect ratio can be displayed on
the screen properly when the type of marker
selected from the main menu.