manualshive.com logo in svg

TVLogic XVM-175W, Руководство по эксплуатации

Поделиться
Скачать
TVLogic XVM-175W Скачать руководство пользователя страница 12

12  Multi Format LCD Monitor   

 

̻

[SCAN] button/lamp

- Used to change the Scan mode. The mode is  
  changed as the following sequence.
   OVER SCAN -> ZERO SCAN -> UNDER SCAN  
  -> 2:1 SCAN -> 1:1 SCAN -> FIT WIDTH -> USER  
 ASPECT

 

̻

[MARKER] button/lamp

- Used to activate or inactivate the marker.   
  The desired aspect ratio can be displayed on  
  the screen properly when the type of marker  
  selected from the main menu.

 

̻

[MENU] button

- Used to activate the OSD menu.

 

̻

[DOWN] button

- Used to move down within the menus  

 

  during OSD menu activation and also  

 

  decrease the value of the selected feature.

 

̻

[UP] button

- Used to move up within the menus during  
  OSD menu activation and also increase the  
  value of the selected feature.

 

̻

[ENTER] button

- Used to confirm a chosen value (or mode).
  It may also be used to control the VOLUME  
  value during OSD menu inactivation.

 

̻

[STANDBY] lamp

- It affords power supply, which may be  

 

  indicated by indication lamp. The lamp is   
  RED during power supply and GREEN during  
  system is in operation.  In case of power cut  
  and sudden shut off of the power, our monitor  
  keep previous setup stage.

 

̻

[POWER] button

- Used to turn power on and off.

 

̻

[USB]

- The USB port for easy firmware updates.

 

̻

[PHONE JACK]

- Used to Stereo Audio Output through Phone  
 Jack.

 

̻

[CONTRAST]

- Used to adjust the contrast.

  

 

̻

[BRIGHT]

- Used to adjust the degree of brightness.

 

̻

[APERTURE]

- Used to adjust the picture sharpness.

3. Controls & Functions

FRONT : XVM-325W

Содержание XVM-175W













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды