TVLogic VFM-058W, Руководство по эксплуатации

Страница: 14 / 36

FHD
Vie
wfinder M
onit
or 14
• Screen TALLY On/Off
- Used to set Tally operation according to
the input level of TALLY IN terminal which is
among the terminals of XLR 4P connector in
the rear.
• Screen TALLY Operating Level
- Used to set the input level of Tally operation.
(Open&Low : less than 0.6V, High Range :
2.5V to 12V.)
- High: Set the level as “High” to activate the
Tally and set the level as “Low” to inactivate
the Tally.
- Low: Set the level as “Low” to activate the Tally
and set the level as “High” to inactivate the Tally.
• Screen TALLY Color
- Used to set Tally color.
- Available colors are Red, Green and Yellow.
• Low Battery Display
- Used to set Low Battery Display function.
- When the battery becomes weak, [Low
Battery] sign is indicated on the OSD.
[4] Display/Video [5] Waveform
5. Menu Operations
• WaveForm/Vector Enable
- Used to activate/ deactivate the Waveform
which is selected in the Waveform/Vector
Type menu.
• WaveForm/Vector Type
- This function sets the Waveform and
Vectorscope. Available options are different
according to the Input signal.
- Activates in the order: YCbCr: Off - Waveform
- VectorScope - Waveform Wide - Waveform
YCbCr - RGB(Conv.)-Wave_Vector - Vector_
YCbCr - Full Waveform(Y) - Full VectorScope.
• Waveform Intensity
- Used to set the brightness level of the
Waveform/ Vectorscope display from 1 to 63.
- The higher the number the brighter the
waveform will be.
• Waveform Trans.
- Used to select the transparency option of the
Waveform/ Vectorscope between Opaque
and Blend.
- Even if the option is set to [Opaque], it will
automatically turn to [Blend] when the main
OSD overlaps the waveform/vectorscope.
And turns back to [Opaque] when the main
OSD disappears.