TVLogic VFM-058W, Руководство по эксплуатации

Страница: 12 / 36

FHD
Vie
wfinder M
onit
or 12
• User Aspect Horizontal/User Aspect Vertical
- Activated only when the [SCAN] mode is set to
[User Aspect] .
- User can adjust the Horizontal and Vertical size
of the screen.
- See section “7. Other Functions [1] User
Aspect” for more information.
• 3G Format
- Used to select 3G-SDI A/B input format among
NORMAL MODE(AUTO - A 422 10BIT_YCbCr
50/60P), A 444 10/12BIT_YCbCr, A 444
10/12BIT_RGB, A 422 12BIT_YCbCr, B 444
10/12BIT_YCbCr, B 444 10/12BIT_RGB, B 422
12BIT_YCbCr, B 422 10BIT_YCbCr 50/60P.
- In NORMAL MODE, automatically detected
when Payload signal is contained.
• H/V Flip
- Allows the displayed image to be flipped
horizontally or vertically.
- This feature provides flexible mounting
options for camera operators.
- Activates in the order : [H Flip]-[V Flip]-[H/V
Flip]
• Scan
- Used to change the Scan mode. Scroll up and
down using the Knob and the mode will chang
as the following sequence. [Zero Scan] -> [Over
Scan] -> [Pixel-To-Pixel] -> [User Aspect]
* [USER ASPECT]: User can control the aspect
ratio by adjusting width and height of the
display.
- See section “7. Other Functions [1] User
Aspect” for more information.
• Aspect
- Used to change the Aspect Ratio.
- Regardless of the original Aspect ratio of the
Input Signal, the Aspect Modes are changed
in the follow sequence. : [16:9][4:3][2.35:1]
[1.85:1][15:9][16:10][Auto]
* [Auto] mode enables the Aspect Ratio of the
output signal to be synchronized to the
original Aspect Ratio of the input signal.
• H/V Delay
- Used to monitor the Blanking area of H sync
and V sync.
• Blue Only
- Used to switch in the order of [Off]-[Blue Only]-
[Mono]-[Off].
- Press the button to remove red and green
components from the input signal and display
blue componet only.
- Press the button again to switch to mono-
chrome mode which has no chroma signal.
[4] Display/Video
5. Menu Operations