TVLogic TVC-FA301N Скачать руководство пользователя страница 5

Страница: 5 / 64

otion Video Camera

Important Important Safeguard



Read all of the safety and operating instructions before using the product.



Save these instructions for future reference.



Do not use attachments or accessories unless recommended by the appliance manufacturer

as they may cause hazards, damage product and void warranty.



Do not use this product near water or moisture.



Do not place or mount this product in or on an unstable or improperly supported location.



Improperlyinstalledproductmayfall,causingseriousinjurytoachildoradult,anddamagetotheprod

uct.Useonlywithamountingdevicerecommendedbythemanufacturer,orsoldwiththeproduct.Toi
nsurepropermounting,followthemanufacturer'sinstructionsanduseonlymountingaccessoriesre
commendedbymanufacturer.



This product should be operated only from the type of power source indicated on the

marking label.

Precautions



Before using, make sure power supply and others are properly connected.



While operating, if any abnormal condition or malfunction is observed, stop using the

camera immediately and then contact your local dealer.



Do not disassemble or tamper with parts inside the camera.



Do not drop or subject the camera to shock and vibration as this can damage camera.



Care must be taken when you clean the clear dome cover. Especially, scratch and dust will

ruin your quality of camera.



Do not install the camera in areas of extreme temperature, which exceed the allowable

range.



Avoid installing in humid or dusty places.



Never expose the camera to rain and water.



Avoid installation in a place with radioactivity. It may cause a malfunction of the part.



Avoid installation in locations with strong magnetic fields or electrical signals.



Avoid installing in places where the camera would be subject to strong vibrations.

Содержание TVC-FA301N

































































Результаты поиска

Содержание TVC-FA301N

Отзывы:

Похожие инструкции для TVC-FA301N

Бренды по названию

Популярные бренды

TVLogic TVC-FA301N, Руководство пользователя

Результаты поиска

Содержание TVC-FA301N

Отзывы:

Похожие инструкции для TVC-FA301N

Бренды по названию

Популярные бренды