TVLogic TVC-FA301N, Руководство пользователя

Страница: 40 / 64

1. POWER
: Turn On/ Off the camera
2. MENU
: Enter menu or exit menu.
3. PRESET/SWING/PATTERN/GROUP
: Select to operate, set, or save.
4. Number pad(0~9)
- Used to set the camera ID to be controlled with the CAM button.
- Used to select a number for operating, setting, or saving the selected preset, swing, pattern, and
group.
- Only when PRESET is selected, the range(BANK) of PRESET is selected with the +10 or +100
buttons.
5. +10/ +100 (BANK)
- Used to set and operate preset function in 10 units using 0 ~ 9 number keypad.
- For example, if you frequently use presets from 120 to 129, set the BANK to 120 and use the
number keypad 0 ~ 9 to move the preset position between 120 and 129.
◈ BANK Setup
1)Set range between 1~9
ⓐ Press +10 or +100 button
ⓑ Press 0 button on the number keypad
2) Set range between 10~99
ⓐ Press +10 button
ⓑ Select a desired 10’s digit number.
ex) Set range between 30~39: +10 → 3
3) Set range between 100~255
ⓐ Press +100 button
ⓑ Select a desired 100’s digit number(1,2) and 10’s digit number in order.
ex) Set range between 100~109: +100 → 1 → 0
ex) Set range between 130~139: +100 → 1 → 3
6. CAM
: Sets the camera ID to be controlled.
◈ Camera ID Setup
ⓐ Press the CAM button for about 3 seconds.
ⓑ Check that the LED of the PRESET button blinks for about 2 seconds and then lights up.
ⓒ Select the ID number of the camera to be controlled.
ⓓ Press the CAM button again.
ⓔ Check that the LED of the PRESET button blinks and then lights down.