Copyrights Tvilight B.V. September 2017. Datasheet is subject to change without notice.
Product
Motion detection
Input voltage
Power consumption
DALI loads
Dimming control
Surge protection
Controller
Electrical protection
Electrical safety
Operating conditions
Product mounting
Housing
Antenna
Dimensions
Product compatibility
Wireless communication
Network security
Over-the-air update
Server communication
Device to Gateway ratio
Remote monitoring
Safety mode
Certification
Manufacturing
Lamp switching capacity
AstroClock
Warranty
Application
Motion detection sensor, wireless communication and lighting control integrated
into one product for a simple plug-and-play installation.
Includes a 5,5m pre-connected power and control cable.
Detects pedestrians, cyclists, and cars (range: 4-120 km/h)
Range: up to 15 m on each side, 9 m in front, 3 m behind
Detection angle: >270 ° (depending on pole diameter)
Triggering of 1-10 neighboring lamps upon detection (user configurable)
230 VAC or 115 VAC, 50/ 60 Hz (depending on variant)
<3W
Max.1
0-10 V or DALI
110 joules (6 Ka), 2 kV combination wave
ARM Cortex-M3 CPU
Class II (Overload and short-circuit protection)
Galvanic isolation between high-voltage and low-voltage terminals
-20°C to +60°C operating; -40°C to +85°C storage; 20% to 90%, Rh non-
condensing
On the pole. Recommended mounting height 5m above the road surface
IP65, UL94V0
Integrated Internally
100 mm x 125 mm x 95 mm
+/- 10 ° adjustable mounting plate to accommodate for pole tilts
Direct wireless communication with CitySense and Gateway, communication with
CityManager: through Gateway
Compatible with conventional (PLL, HID, HPS) and LED luminaires.
2.4 GHz IEEE 802.15.4 self-forming, self-healing wireless network
Depending on variant:
+9.5 dBm max. transmit power, -96 dBm receiver sensitivity, up to 150 meter open field range
or + 22 dBm transmit power, -100 dBm max. receiver sensitivity, up to 1 KM open field range
Up to 250 kbps microcontroller RF data rate
32-bit microcontroller, 64 kB Flash and 16 kB RAM
128 AES Multi-layer security
Configuration, software as well as firmware can be updated remotely ensuring up-to-date network
infrastructure
via Gateway
200:1
Via CityManager or similar third-party management software. CityManager enables remote
management, monitoring, control, and configuration of lamps
on individual and group level.
Auto-safe: in a case of network loss, brightness will go to a pre-defined level depending on the
settings. Astro clock based scheduling is still possible.
CE, CB, EN61547, EN55015, EN60950-1, EN61347-1/2-11, EN 301 489-1/17, EN
300 328, RoHS. RF transceiver compliant with US (FCC), Canadian (IC), European (ETSI), and
Japanese (Telec) standards
ISO 9001:2008, Made in Europe
1400 VA (Relay), 6A max. current.
Battery-backed real-time clock; AstroClock function.
Able to switch on/off the lamps at sunset/sunrise and adjust them seasonally (summer-winter time).
Eliminates the need for conventional photocell
Standard 2 years limited warranty. Extended warranty available. Warranty subject to proper use of installation- and
application manuals.
Outdoor street lighting, Area lighting
TECHNICAL SPECIFICATIONS
Keywords: Wireless iSLC, iOLC Radio Frequency (Intelligent Street /Outdoor Lighting Controller RF), Outdoor Wireless Sensor
(CS-PRAI) 230 VAC (PR150868) or 115 VAC (PR151116)
Page 2 of 8
