TVB Tech 3199F-14, Руководство по эксплуатации

Страница: 6 / 16

5
[ INSTALLATION ]
To reduce the risk of serious injury during use, follow these procedures for proper assembly.
1. Install Camera Head
Put the cable into the hook of the handle, (Figure 7.) Hold the cable connector in one hand, then screw the
camera and fix it on the cable tightly. (Figure 8.)
2. Install aviation cable
Plug the cable into the socket of the panel and screw
tightly. (Figure 9.)
HOOK
CABLE
Figure 7. Cable reel in the case
Camera Head
Cable
Figure 8. Assembly/Disassembly Camera
Figure 9. Install aviation cable
3. Install power
cable
C o n n e c t t h e p o w e r
c able t o b a t t er y and
panel. (Figure 10.)
Figure 10
.
Install power cable
4. Install guide fitting
Support Guide are designed to help position the camera towards the middle of the pipe. There are 2 kinds of
guides, choose guides properly per application requirement.
A. 23mm camera head
a. Installing 46 Support Guides.
Sleeve the camer a heads with 46 Suppor t guide.
(Figure 11.)
b. Install 80 Support Guides.
Mount the 80 suppor t guide onto the stainless steel
camera head. Then tighten the screw by screwdriver.
(Figure 12.)
D46 Applicable to 2.5”-3.5” pipe.
Camera Head
Support Guides
Screw 2X
Figure 11. Install 46 Support Guides
D80 Applicable to 4”-5” pipe.
Screw 2X
Camera Head
Support Guides
Figure 12
.
Install 80 Support Guides
B. 14mm camera head
Install 28 support guides.
Mount the 28 support guide onto the stainless steel
camer a head. Then tighten the scr ew by Wr ench.
(Figure 13.)
D28
Applicable to 1.5”-2” pipe.
Figure 13. Install 28 Support Guides