TV One 1T-SX-632, Инструкция по эксплуатации

Страница: 10 / 11

8
6.0 TROUBLESHOOTING
In the event of problems, first make certain that the input and output cables are no more
than 50 feet long (for signals to 1080i resolution) and are of the highest possible quality.
Next, make certain that the Switcher is receiving power.
If all is well in these areas, remember that HDMI devices communicate with one another
so the source devices and destination device must be fully HDMI capable. In addition,
HDCP encryption requires additional processing which also is dependent on the
equipment you have connected to the sources and destination device. If you experience
problems using the 1T-SX-632 or 1T-SX-634 HDMI Switcher, you should attempt to
determine what is wrong by attaching each of the source devices – one at a time –
directly to the destination device using the same cables you are using with the
expanded system. This is a way of determining if the problem is due to bad cables or a
problem with the other devices. If you are unable to obtain a signal using this simplified
path, suspect the cables, the source device(s) or the destination device.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical
personnel be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com. Create a technical support request on the site and our
support team will respond within a short period of time.
Pin Definitions
HDMI Switcher Control Unit
PIN Definition PIN Definition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC