7
5.7 Using the Genlock Capability
The 1T-PAL-NTSC-GL model has the ability to lock its output to a reference signal. This
allows the unit’s output to be used in a studio environment as an input to a video
switcher or special effects device requiring a timed video input source.
Additionally, the genlock capability also includes a loop through function. This allows
one genlock signal to be cascaded from one 1T-PAL-NTSC-GL to another thereby
providing multiple timed video sources if needed.
If you only intend to use a single 1T-PAL-NTSC-GL, set the switch on the back on the
unit marked TERM 75
to the ‘On’ position. This will ensure that the impedance of the
genlock source is properly terminated. Similarly, if you cascade several 1T-PAL-NTSC-
GL genlock inputs using the loop through capability, also make certain you switch the
termination of the last unit to ‘On’.
6.0 TROUBLESHOOTING
Most problems with the 1T-PAL-NTSC-GL and 1T-PAL-NTSC are related to misuse of
the buttons and signal adjustment controls. If you find that the picture is not acceptable,
place the unit in the automatic detection mode and then press and hold the Reset
button for 3 seconds to restore factory defaults. This should clear the problem. Another
problem revolves around the cables. Inspect the cables for loose connectors or cable
damage such as crushed cables or cables with cuts or nicks. Replace any cable
exhibiting these problems.
You also must use the highest quality cables if you want to achieve the best results.
Poor quality cables will cause poor quality signals.
After trying the above suggestions should the problem still persist, contact your dealer
for additional suggestions before contacting TV One. Should the dealer’s technical
personnel be unable to assist you, contact TV One via our support website:
http://tvone.crmdesk.com.
Create a technical support request on the site and our
support team will respond within a short period of time.
7.0 LIMITED WARRANTY
TV One warrants the original purchaser that the equipment it manufactures or sells will
be free from defects in materials and workmanship for a fixed term from the date of
purchase. The warranty term for specific product lines is defined below.
1. TV One branded products based on TV One’s CORIO technology are warranted for
a period of five years from the date of purchase. This includes products with the
model number prefix of C2, 1T-C2, CX, A2 or S2.
Содержание 1T-PAL-NTSC
Страница 1: ...Operation Manual 1T PAL NTSC and 1T PAL NTSC GL Standards Converters...
Страница 2: ......
