TV One 1T-DVI-512, Инструкция по эксплуатации

Страница: 4 / 10

2
1.0 INTRODUCTION
Thanks for purchasing this 1T-DVI-512 or 1T-DVI-514 HDCP compliant DVI
Distribution Amplifier from TV One. The 1T-DVI-512 and 1T-DVI-514 DVI DAs
are designed to allow the distribution of a single DVI HDCP compliant input to
multiple DVI HDCP compliant devices. Our professional video conversion
products have been serving the industry for over twenty years. TV One offers a
full line of high quality Seamless Switchers, Video Scalers, Up/Down/Cross
Converters, Analog-Digital Converters (SD/HD-SDI, HDMI, DVI), Format
Converters, Standards Converters, TBC/Frame Synchronizers, Matrix Routing
Switchers, Signal Distribution Amplifiers and Cat.5 Transmission Systems.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. TV One
cannot be held liable for the use of this hardware or any direct or indirect
consequential damages arising from its use. It is the responsibility of the user of
the hardware to check that it is suitable for his/her requirements and that it is
installed correctly. All rights reserved. No parts of this manual may be
reproduced or transmitted by any form or means electronic or mechanical,
including photocopying, recording or by any information storage or retrieval
system without the written consent of the publisher.
TV One reserves the right to revise any of its hardware and software following its
policy to modify and/or improve its products where necessary or desirable. This
statement does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The TV One logo, TV
One-task and CORIO are the registered Trademarks of TV One. All other
trademarks are the property of their respective holders.
1.2 Features
The 1T-DVI-512 1x2 and 1T-DVI-514 1x4 DVI DA’s have many features that
enable them to perform in a superior manner. Among those features you will find:

Supports HDCP

Supports resolutions to UXGA and 1080p

One DVI (HDCP or non-HDCP) signal can be distributed to either two or
four DVI devices (depending on Model)

The Distribution Amplifiers can be cascaded