TV Logic LUM-300W, Руководство по эксплуатации

Страница: 9 / 32

4K LCD Monitor 9
FRONT
3. Controls & Functions
●
[MENU] Button
- Used to activate the OSD menu.
●
[DOWN/BRIGHT] Button
- Used to move up through the menus during
the OSD menu activation and also to decrease
the value of the selected feature.
- May also be used to control the BRIGHT value
during the OSD menu inactivation. Use the
UP/DOWN buttons to adjust the value.
●
[UP/CONTRAST] Button
- Used to move down through the menus
during the OSD menu activation and also to
increase the value of the selected feature.
- It may also be used to control the CONTRAST
value during the OSD menu inactivation. Use
the UP/DOWN buttons to adjust the value.
●
[ENTER/VOLUME] Button
- Used to confirm a chosen value (or mode).
- May also be used to control the VOLUME
value during the OSD menu inactivation. Use
the UP/DOWN buttons to adjust the value.
●
[OPERATE] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is
disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green
LED light.
- Restores to previous status when monitor
power turns off and comes back on.
●
[POWER] Button
- Used to turn the power on and off.
5). H/V DELAY
- Used to check horizontal and vertical
sync simultaneously by moving the screen
up/down/left/right.
- In this mode, the brightness of image
automatically increase for easy verification
of synchronized signals.
6). FREEZE
- Captures still frame on-screen.
7). VIDEO RANGE
- Used to select the range of brightness.
* LIMITED(EX) : Output : 16 ~ 255
* FULL : Output : 0 ~ 255
* LIMITED : Output : 16 ~ 235
* EXTENTION : Input : 16 ~ 235 Output : 0
~255
8). DITHERING
- Used to activate/deactivate the 10bit
dithering function.
9). COLOR TEMP
- Used to controls the color temperature
and allows instant access to preset
the color temperature settings.
10). HD DISPLAY
- Used to control the display ratio in HD
mode.
- Available values are 16:9, 1.85:1 and 2.35:1.
11). AUDIO LVM
- Used to activate/deactivate the Audio Level
Meter.