manualshive.com logo in svg

TV Logic LEM-150, Руководство по эксплуатации

Поделиться
Скачать
TV Logic LEM-150 Скачать руководство пользователя страница 15

Multi F

orma

t L

CD M

onit

or 

1

Menu Organization & Adjustment

The product may be controlled and set system-wise through OSD displayed on the screen.

  1) Menu Organization
         Below is the organization of the product’s menu.

2) Menu Control

       You may control various functions using MENU, UP/DOWN and ENTER buttons on the bottom 
          front of the monitor.

  3) Menu Control Sequence
       Menu control sequence follows the order below :

          1. Press MENU button to bring the OSD menu on the screen.
          2. Display the desired sub menu with the UP/DOWN button.
          3. After selecting a sub menu, press ENTER to select an item with the UP/DOWN button. 
          4. Press ENTER to select the desired item (verified by highlighted field text turning red).
          5. Press ENTER to save the new value after adjusting the value with UP/DOWN button (Verified 
              by highlighted field returning to default black color).
          6. Press MENU to remove OSD menu from the screen.
          7. To view next page in the sub menu, press ENTER button at PAGE I >> PAGE II.

  4) Main Menu Window Information
         

①

 Menu item and page info.

         

②

 Model name(LEM-150).

         

③

 Current input signal.

         

④

 Current input signal resolution.

PAGE I >> PAGE II

BRIGHT                        0

CONTRAST                      0

CHROMA                        0

PHASE                         0

APERTURE                      0

NTSC SETUP               7.5IRE

VGA H POSITION              MIN

VGA V POSITION              MIN

③

②

④

①

SDI A               LEM-150         1080/60i

Содержание LEM-150





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды