www.tuv.com
Test Report No.: 14014459 001
Appendix 4
page 26 of 41
(Page 9)
Pairing Your Headset
1. Place the headset and the mobile phone where they are no more than one meter apart.
2. Ensure the headset is off. (The display is unlit)
3. Press and hold the MFB until the headset’s
display will show “Pairing”.
4. Activate your mobile phone’s Bluetooth function. Please refer to your mobile phone user guide for details.
5. Set the mobile phone to search for Bluetooth devices within the one meter range, as instructed in the mobile
phone user guide, and select “i.Tech Clip D” from the list.
6. Enter the pre-programmed passkey “0000” and press “OK” to pair your headset and mobile phone. When
the pairing is completed, the headset’s display will show “Paired” and followed by a long beep.
7. Go back to your mobile phone’s main menu. For certain mobile phone models, once the headset is activated,
a headset icon will be shown on the screen. You should now be able to make and receive calls using your
headset.
IMPORTANT: If the pairing cannot be completed within two minutes after the pairing mode has been
activated, the headset’s status indicator will flash purple-red accompanied by three beeps and will then
turn off automatically. Please repeat steps 2 to 7 above to pair the headset and the mobile phone again.
