www.tuv.com
Test Report No.: 14014459 001
Appendix 4
page 24 of 41
(Page 7)
Turning Your Headset On and Off
Turning On the Headset
Press and hold the
MFB
(see Figure 1) for two seconds until you hear a short beep. The display will prompt
“i.Tech Dynamic”..
IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and
ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer
to “Pairing Your Headset”.
Turning Off the Headset
Press and hold the
MFB
for two seconds until you hear a long beep.
IMPORTANT: To disconnect the Bluetooth connection, press the headset’s MFB firmly to turn it off. If
you will not be using the headset for a while, we advise
you turn off the Bluetooth function on your
mobile phone as well.
