19
|
tuuci
1005376
North America version:
208-240V, 2 phases 60Hz (requires a minimum 15 Amp circuit)
Umbrella comes with (2) 10ft Power Cords & Plugs. One for each circuit required.
(Use with 20A - 250 Volts, NEMA 6-20R Receptacle compatible with NEMA 6-20P Plugs)
Europe version:
220-240V, 1 phase 50Hz (requires a minimum 16 Amp circuit)
Umbrella comes with (2) 10ft Power Cords & Plugs. One for each circuit required.
(Use with 16A - 250 Volts, Schuko Receptacle compatible with Schuko 16A - 250 Volts Plugs)
Customer must connect to a protected power source circuit with proper Current Rating “Amps”, near the umbrella,
using an above ground Junction box, according to their local electrical codes and regulations.
warnings & safety instructions
1. Read and understand entire owner’s manual before assembling or operating umbrella.
2. Read and understand the warnings posted on the umbrella and/or components installed on the umbrella.
3. Disconnect electrical power to umbrella during inclement weather.
4. There is a risk of fi re if heaters contact fl ammable materials or liquids.
5. Keep children away from power cords on or around umbrella.
6. Disconnect power before removing or servicing umbrella.
7. Allow suffi cient cooling of heaters before closing umbrella.
8. Do not use this umbrella for other than its intended use.
9. Replace warning labels if they become obscured or removed.
10. Make sure the umbrella is properly electrically grounded.
11. Provide for adequate space to open and close umbrella without obstructions.
12. Customer’s electrical power source connections if any, are to be installed / connected by a certifi ed electrician. check local codes for guidance.
13. When closing / opening umbrella keep hands and face clear of all pinch points, or protruding umbrella components.
Emergency shut-down or interrupt Feature
Press the Power button on the control panel to shut-down or interrupt the operation of any function (Ambia LED lights and heaters).
The red light on the Power button will turn OFF. The white lights on the heater icon and the light icon will turn OFF. Press the Power
button to turn the umbrella back ON.
Control panel indicator when the Umbrella is not level (tipped or tilted on an angle)
The Power button will be fl ashing in yellow when the umbrella is not level. All functions (Ambia LED lights and heaters) are inactive.
The TUUCI logo is not backlit. When the umbrella is level and no longer tipped or tilted, it will return to a powered down state with the
TUUCI logos backlit in white and all other functions OFF. Press the Power button to turn-on the umbrella. Then, turn-on the various
functions.
Lock-out unauthorized users from turning-on or -off various features of the Umbrella
There is a lock-out feature to prevent unauthorized user access. To turn-on the lock-out feature, press and hold the Power button for
5 seconds. All functions (Ambia LED lights and heaters) will maintain their original state of ON or OFF.
The power button will be a solid
yellow when the lock-out feature is activated.
To turn-off the lock-out feature, press and hold the Power button for 5 seconds. All functions (Ambia LED lights and heaters) will maintain
their current state of ON or OFF. Users will have access again to turn ON-OFF the various functions.
If the Power button is pressed during a lock-out condition, activating the emergency shut-down or interrupt feature, the Ambia LED
lights and heaters will be turned-off. All icon button lights will be OFF, except for the TUUCI logos.
Heater Automatic Turn Off Safety Feature
As a safety feature, the heaters on the Automated Umbrella will automatically turn off after 2 hours of operation.
To turn the heaters back on, press the heater icon button.
lights and heaters features and functions
for frequently asked questions visit tuuci.com/automationCL
Power Supply:
Main Input Voltage:
208-240VAC
50/60 Hz
Max. Amps:
13.7 A @220Volts AC
12.6 A @240Volts AC
Max. Watts:
3010 Watts
(2) Light Units, (4) Heaters Electrical Specs:
This dual canopy umbrella requires two electrical circuits (one circuit for each canopy side).
Each circuit will consist of (1) light unit and (2) heaters, for a total of (2) light units and (4) heaters.
Specifi cations for each circuit will be:
