Tuttnauer ELARA11-D, Техническое руководство, Страница: 98 / 176

Page 97
10.6
Replacing the Water Reservoir Water Electrodes
1. Open the outer covers of the autoclave (see 10.2).
2. Disconnect the wires of the electrode (1).
3. Unscrew the nut (2)
4. Apply some leakage prevention glue inside the nut and tighten it
5. Reconnect the wires and close the cover.
10.7
Replacing the Drain Valves
The drain valve is located on the front of the autoclave. The drain valve
function is to drain the mineral free water from the reservoir.
Caution!
Before starting, disconnect the instrument from the power source and
ensure that there is no pressure in the autoclave.
Allow the autoclave to cool before removing outer covers.
1. Remove the autoclave cover (see 10.2).
2
1
1
2
www.shanghaidelan.com 021-54263653