Tuttnauer ELARA11-D, Техническое руководство

Страница: 32 / 176

Page 31
3. Visual Information Center
4. Control Center.
5. Data Output Center
Visual Information Center
The information center contains the display which is an LCD panel used
to display the current status of the autoclave and any Operational Messages or
Error Messages.
The Control Center
The Control Center contains the ON/OFF switch/Circuit Breaker and the
Keypad
The keypad consists of 3 keys as described below:
UP key
This key has the following functions:

In the main screen:
o
This key enables the operator to browse through the
cycles.

In the menu directories:
o
When the cursor is blinking on a number, the UP
▲ key
increases its value.
o
When the cursor is blinking on a menu selection, the UP
▲ key allows browsing backward through the menu.
o
When adjusting a parameter and the cursor is blinking on
“SET” or “EXIT” the
UP
▲ key activates that procedure.
DOWN key
This key has the following functions:

In the main screen:
o
This key enables the operator to browse through the
cycles.
Program description:

Program icon and name
Chamber
temperature
Chamber
pressure

System status

Name of stage

Error and operational messages
Program Parameters:

Sterilization temperature

Sterilization time

Drying Time
www.shanghaidelan.com 021-54263653