Tuttnauer 1730MK Valueklave Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 53

background image

3

1

GENERAL

Read the Operating Instructions carefully, before beginning any operation

on the autoclave!

1.1

Manufacturer and US Official Correspondence Information

The Autoclave is manufactured by Tuttnauer Ltd., Located

Har-Tuv B Industrial Zone, P.O. Box 170, Beit Shemesh 9910101, Israel.



Tel: +972-2-9904611

The US Official Correspondence is:



Tuttnauer U.S.A Co, Ltd. 25 Power Drive Hauppauge, NY, 11788,

USA.



Tel: (631) 737 4850, (800) 624 5836,



Fax: (631) 737 0720

1.2

Intended Use

The autoclave is designed for the sterilization of medical and surgical

goods  such as  wrapped  and unwrapped solid,  hollow, and porous  loads
used  in  healthcare  facilities  (e.g.,  hospitals,  nursing  homes,  extended
care  facilities,  freestanding  surgical  centers,  clinics,  and  medical  &
dental clinics).

1.3

Intended Users

The autoclave is intended for use by hospital personnel and other medical

personnel.

All autoclave users must receive training in proper usage from an

experienced employee. Every new employee must undergo a training
period from an experienced employee.

1.4

Incoming Inspection

Upon  receiving  your  Tuttnauer  Autoclave  carefully  inspect  the  outside
of the shipping carton for signs of damage. If any damage to the carton
is  found,  note the location with  respect  to  the autoclave and check that
area  of  the  autoclave  carefully  once  it  is  fully  unpacked.  Observe
packing  method  and  retain  packing  materials  until  the  unit  has  been
inspected. Mechanical inspection involves checking for signs of physical
damage such as: scratched panel surfaces, broken knobs, etc.

If any damage is found, contact your dealer as soon as possible so
that they

can

file

a

claim

with

the

shipping

carrier

and

notify

Tuttnauer.

All Tuttnauer products are carefully inspected prior to shipment and all
reasonable precautions are taken in preparing them for shipment to
assure safe arrival at their destination.

Note

: Lifting and carrying should always be done by two people.

1.5

Warranty

We certify that this instrument is guaranteed to be free from defects in
material and workmanship for one year against faulty components and
assembly.

This warranty does not include routine cleaning and preventive
maintenance to be performed according to instructions in

section 8.1 (Preventive and Scheduled Maintenance).

«
...
2
3
4
5
6
...
»

Содержание 1730MK Valueklave






















































Отзывы:

Нет отзывов

Похожие инструкции для 1730MK Valueklave

Бренд: Laica Страницы: 4

Бренд: Jacobs Ladder Страницы: 16

Бренд: Danfoss Страницы: 106

Бренд: Maico Страницы: 55

Бренд: Maico Страницы: 38

Бренд: Maico Страницы: 2

Бренд: MAHA Maschinenbau Haldenwang Страницы: 13

Бренд: Tactile Medical Страницы: 23

Бренд: Taarup Страницы: 72

Бренд: M-Audio Страницы: 48

Бренд: M-Audio Страницы: 19

Бренд: M-Audio Страницы: 17

Бренд: M-Audio Страницы: 18

Бренд: M-Audio Страницы: 12

Бренд: M-Audio Страницы: 20

Бренд: YASKAWA Страницы: 40

RAISED GARDEN BED

Бренд: Yardfully Страницы: 2

Бренд: Zero 88 Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды