7
Using the slider, you can move the selection cursor from the name of the zone to the favourite parameter:
In this case, the keyboard works differently:
-
arrow keys: parameter modifying (on/off zone, volume changing, input source changing)
-
OK key: forwarding to next zone; the cursor remains on the selected column
-
ESC key: quick return of the selection cursor to the zone name
-
slider: move the cursor between parameters or the zone name
QUICK SYSTEM SETUP
In order to startup the system you have to follow 4 steps:
Configure main unit settings
Configure audio/video sources
Configure zones
System startup
Main unit settings
1.
Enter the navigation menu (press OK when display is in normal state - time)
2.
Select
UNIT SETUP…
3.
Select the favourite language; following items are related to English language
4.
In line
DATE
set the current date (DayOfTheWeek Day/Month/Year)
5.
In line
TIME
set the current time (hour:minutes). Select also AUTO DAYLIGHT S.T. if your country adopt daylight
saving time and you want that the unit automatically does the correction on last Saturday of March and October.
6.
Under
SOURCES NUMBER
select the number of centralized sources connected to the matrix.
Notice
: this setting is for all zones, each zone will listen up to the maximum input number set in this line (in
ZONES
SETUP…
there will be the possibility to selectively exclude some sources for the zone within those globally available)
7.
Enable (with a check mark) or disable “LOCAL INS ENABLED” depending on whether local sources are or not
connected to the matrix.
Notice
: this setting is for all zones, if there is at least one local source connected to the matrix
enable this option (in
ZONES SETUP…
there will be the possibility to selectively exclude the presence of local zone
source)
Source settings
1.
Enter the navigation menu (press OK when display is in normal state - time)
2.
Select
SOURCES SETUP…
3.
Use the slider for cycling between the 8 centralized sources and press OK on the one you want to configure.
Notice
: for the first installation use the reference number of the source (not its name), you can change the
name of the source when entering the configuration
4.
Select submenu
CHANGE NAME…
if you want to change the name of the source:
4.1.
Press OK on the name you want. It’s possible to cycle between a predetermined list of names
5.
Under
TYPE
select the type of audio input source: MONO or STEREO.
Notice
: if the source is mono you can plug the
audio signal indifferently on left or right input.
6.
Under “SENS.” select the audio output level (measured in Vrms) of the source. For the inputs 1 to 6 the range spans
from 0.5 Vrms and 2 Vrms. For inputs 7 and 8 the range spans from 1.07 to 4.25 Vrms. Proper configuration of this
parameter is very important to ensure undistorted sound and uniformity on listening volume when switching between
different sources. If signal output level is unknown we recommend starting with high values and then go down slowly.
Notice
: if these values are changed with the system running, they have no immediate effect on the zones. Just switch
off and then switch on the zone to apply changes.
Zone settings
1.
Enter the navigation menu (press OK when display is in normal state - time)
2.
Select
ZONES SETUP…
3.
Use the slider for cycling through available zones (the total number of zones depends on the number of MTxE816
expansions installed) and press OK on the one you want to configure
4.
Under
OUT TYPE
select if the output is
MONO
or
STEREO
. If you configure the output as
MONO
the matrix automatically
mixes stereo inputs to generate a mono output