Tuthill NEXTEC FILL-RITE NX25-DDC Series Скачать руководство пользователя страница 4

   |  NX25-DDC SERIES DC FUEL TRANSFER PUMP

As a tank is being filled, air is displaced and exits via the fuel tank 

vent creating fumes, which when accumulated create an Explosive 

Atmosphere. To avoid possible explosion of accumulated vapors, it is 

critical to keep possible sources of spark / ignition at safe distances 

from the fuel vapors.
The accompanying diagram shows minimum safe distances for safe 

fueling. 10’ is the minimum safe distance between:

• 

Power source and fuel supply

• 

Power source and tank being filled

• 

Power source and pump

Fueling Safety 

Installation 

Your Fill-Rite NX25-DDC pump is designed to be mobile for your convenience and safety.  It can be installed  / used in several configurations.  Read each configuration 

prior to beginning installation.

CAUTION!

  This product is not suited for use with fluids intended for human consumption or fluids containing water.  Materials of construction are not food grade. Water 

will cause rust and corrosion in the pump housing. If water enters the pump, flush immediately with a petroleum product (gasoline, diesel, light oil, etc) to eradicate 
residual water.

IMPORTANT! 

 A Fill-Rite filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank.  Foreign material can damage the 

equipment being fueled.

WARNING!

  The NX25-DDC smart pump is designed for use on skid tanks, and large bulk tanks to supply fuel. It is paramount to anchor the supply tank to which the pump 

is mounted to ensure no movement occurs in transit or while fueling.  Failure to secure the tank or drum can cause unexpected and uncontrolled movement, resulting in 
damage, injury, death, and potential fire or explosion. 

DANGER! 

 Fumes accumulated while fueling create an Explosive Atmosphere.  It is 

CRITICAL

 that all possible sources of ignition be removed to a safe distance or 

extinguished. Sources of ignition would include (but not be limited to) open flames, cigarettes, static discharge, or electrical connections that can create a spark.  
Explosion, fire, and severe injury or death will occur if the explosive vapors are ignited.

SUCTION TUBE OR HOSE

DISCHARGE HOSE

PUMP

POWER SUPPLY

PO

W

ER

CO

RD

If applicable.

PUMP INLET  

SIDE TANK

PUMP OUTLET 

SIDE TANK

10' MIN

10' MIN

10' MIN

.

.

.

.

Содержание NEXTEC FILL-RITE NX25-DDC Series

















Отзывы: