Tuthill M-D Pneumatics PD Plus Скачать руководство пользователя страница 48

Страница: 48 / 82

Recommended Lubricants

Manual 2006 Rev B p/n 2006

RECOMMENDED SYNTHETIC BASED, FOOD GRADE LUBRICANTS

AMBIENT

TEMPERATURE

LUBRICANT MEETING U.S. FDA REGULATION

21 CFR 178.3570 GOVERNING PETROLEUM

PRODUCTS WHICH MAY HAVE INCIDENTAL

CONTACT WITH FOOD,

AND USDA H1 REQUIREMENTS

LUBRICANT MEETING U.S. FDA REGULATIONS

21 CFR 172.878 AND 178.3620(A) FOR DIRECT

AND INDIRECT FOOD CONTACT

0° to 32°F

(-18° to 0°C)

PneuLube™ FG

(ISO 100)

CONSULT FACTORY

32° to 90°F

(0° to 32°C)

90° to 120°F*

(32° to 50°C)

RECOMMENDED LUBRICANTS FOR M-D VACUUM BOOSTERS

REQUIREMENTS

• Suitable for high vacuum service

• 100 cSt @ 40°C

• Vapor pressure of 1 micron or less @ 70°F (21°C)

• Straight mineral (no additives) or PAO synthetic oil

RECOMMENDED GREASE FOR COMPETITOR® PLUS BLOWERS:

TUTHILL

CITGO

Tuthill PneuLube™ NLGI #2 premium grade,

petroleum base lithium grease.

For food grade requirements:

Use Citgo Clarion® Food Grade HTEP grease,

NLGI No. 2 grade. It meets all requirements of FDA Regulation 21 CFR

178.3570 (the former USDA H-1 approval requirements) for lubricants having

incidental contact with food.

For higher ambient temperatures, please consult the factory.

** Blowers used in oxygen-enriched service should use only Castrol Brayco 1726 Plus non-ﬂ ammable, PFPE synthetic lubricant.

Blowers used in hydrogen service should use only PneuLube synthetic oil. Tuthill Vacuum & Blower Systems cannot accept

responsibility for damage to seals, O-rings and gaskets caused by use of synthetic lubricants not recommended by Tuthill

Vacuum and Blower Systems.

Содержание M-D Pneumatics PD Plus



















































































Результаты поиска

Содержание M-D Pneumatics PD Plus

Отзывы:

Tuthill M-D Pneumatics PD Plus, Руководство по эксплуатации, Страница: 48 / 82

Результаты поиска

Содержание M-D Pneumatics PD Plus

Отзывы: