manualshive.com logo in svg

Tuthill M-D Pneumatics PD Plus, Руководство по эксплуатации, Страница: 17 / 82

Поделиться
Скачать
Tuthill M-D Pneumatics PD Plus Скачать руководство пользователя страница 17

11

Manual 2006 Rev B p/n 2006

GENERAL

DANGER

!

The blower is not intended to be used 

with explosive products or in explosive 

environments. The blower is not intended 

to be used in applications that include 

hazardous and toxic gases. Consult the 

factory for support.

DANGER

!

It is the responsibility of the installer to 

assure that proper guarding is in place and 

compliant with all applicable regulatory 

requirements.

WARNING

!

The bare shaft blower can 

generate excessive noise. 

Methods to reduce the noise 

levels by installing inlet and 

outlet silencers will be required. 

Even with inlet and outlet 

silencers, hearing protection 

will be required.

WARNING

!

Customers are warned to provide adequate 

protection, warning and safety equipment 

necessary to protect personnel against 

hazards in the installation and operation of 

this equipment in the system or facility.

WARNING

!

The standard MAWP is per 

Table 4-2

. The 

MAWP shall not be exceeded unless specific 

factory testing of the pressure containing 

components of the blower has been 

performed.

WARNING

!

Table 4-2

 states the maximum operating 

speed in RPM (rotations per minute) and 

maximum temperature. Do not exceed these 

limits. The installation of the blower shall 

take these critical operating parameters 

into account and adequate control features 

implemented.

INSTALLATION

05

Содержание M-D Pneumatics PD Plus



















































































Отзывы:

Нет отзывов