Tuthill M-D Pneumatics 9000 Series, Руководство оператора

Страница: 23 / 44

23
DAILY WEEKLY MONTHLY
1. Check and maintain oil level,
and add oil as necessary.
2. Check for unusual noise or
vibration (See Troubleshooting )
1. Clean all air filters. A clogged air filter
can seriously affect the efficiency of the
booster and cause overheating and oil
usage.
2. Check relief valve to assure it is
operating properly.
1. Inspect the entire system for leaks.
2. Inspect condition of oil and change
if necessary.
3. Check drive belt tension and
tighten if necessary.
NOTE
Oil levels should be checked every 24 hours of operation.
Proper oil drain schedules require oil be changed before the contaminant load becomes so great that the
lubricating function of the oil is impaired or heavy disposition of suspended contaminants occurs. To check
the condition of the oil, drain a sampling into a clean container and check for the presence of water or solids.
Slight discoloration of the oil should not necessitate an oil change.
7.3 SPARE PARTS
Should adjustments or replacement eventually be needed, these can often be performed locally as
described in this book after obtaining required parts. Personnel should have a good background of
mechanical experience and be thoroughly familiar with the procedures outlined in this manual. Major
repairs not covered in this book should be referred to the nearest Tuthill Springfield service representative.
When ordering parts, give all booster nameplate information, as well as the item number and parts description
as per the parts lists and assembly drawings for your particular model. Repair kits are available for all
models. These kits contain all of the seals, bearings, O-rings, locks, and special retaining screws necessary
for an overhaul. For your convenience when ordering parts, we suggest you complete the Operating Data
Form included on the inside, back cover of this manual.
In developing a stock of spare parts, consider the following:
• The degree of importance in maintaining the booster in a “ready” condition
• The time lag in parts procurement
• Cost
• Shelf life (seals and O-rings)
Contact Tuthill Springfield Service Department for any assistance in selecting spare parts.
Telephone: (417) 865-8715 — Toll Free (48 contiguous states): (800) 825-6937 — Fax: (417) 865-2950
7.4 FACTORY SERVICE & REPAIR
With proper care, Tuthill Springfield boosters will give years of reliable service. The parts are machined
to very close tolerances and require special tools by mechanics who are skilled at this work. Should major
repairs become necessary, contact the factory for the authorized service location nearest you. Units which
are still under warranty must be returned to the factory, freight prepaid, for service.
Tuthill Springfield
ATTN: Inside Service Manager
4840 West Kearney Street
Springfield, MO 65803-8702