Tuthill KINNEY KVA100, Руководство оператора, Страница: 12 / 36

8
05
Maintenance
Manual 1865 Rev B p/n 001865 0000
OIL SPIN-ON FILTER
Replace the spin-on filter at every oil change.
Please consult Tuthill Vacuum & Blower Systems’
authorized representative for part numbers.
EXHAUST FILTER
Replace the exhaust filters every 9 to 18 months
of operation or as necessary. The service life of
the exhaust filters varies depending upon the
application and frequency of oil change. It is
necessary to change the exhaust filters only when
they become clogged. Indications of clogged
exhaust filters are smoke or oil mist coming from
the exhaust of the pump, a higher than normal
motor current, and an exhaust pressure gauge
reading of 3 psig (21 kPa) or greater.
Do not clean or re-use exhaust filters. Dispose
of the exhaust filters properly as they might
contain toxic substances carried over from the
process. Replace the O-rings on the exhaust
filter when changing it.
Please consult Tuthill Vacuum & Blower Systems’
authorized representative for part numbers.
OVERHAUL KIT AND ACCESSORIES
An overhaul kit contains a set of gaskets, O-rings,
vanes, bearing, bearing sleeves, shaft seals,
and taper pins. Please consult Tuthill Vacuum &
Blower Systems’ authorized representative for part
numbers.
MAINTENANCE SCHEDULE
The operating life of the pump is greatly affected
by the oil quality and filter condition. Periodic
maintenance will ensure a reliably operating
vacuum pump.
Daily: Visually check oil level and color.
Weekly: Inspect inline (inlet) filter.
Monthly: Check the exhaust filter’s function.
Every 2 – 6 months:
Drain and discard oil from
pump while hot. Refill with fresh oil.
Every 9 – 18 months: Replace exhaust filter
elements and O-ring.
Every 500 – 2,000 Operating hours: Change the
oil and oil filter. In models equipped with the float
valve with a return line, check the float valve’s
operating conditions.
See the motor manufacturer’s manual for the
periodic motor maintenance.