Tuson NG90100, Инструкция по эксплуатации

Страница: 26 / 32

■
lead from lead-based paints
■
Arsenics and chromium from chemically
reacted lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment.
ACCESSORIES
●
Charger
●
Battery pack
Be sure to check the accessories as it is
subject to change by areas and models.
OPERATION
1. BATTERY CHARGING
Please Indoor charging.
Use only the battery chargers listed on
the accessories page.
Only these battery
chargers are matched to the lithium-ion battery
of your power tool.
The battery is supplied partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at
any time without reducing its service life.
Interrupting the charging procedure does not
damage the battery.
WARNING: Do not continue to press the
on/off switch after the machine has been
automatically switched off. The battery can
be damaged.
To remove the battery7, press the battery
release button 8 and pull out the battery
downwards. Do not exert any force.
The battery equipped with an NTC temperature
control which allows charging only within a
temperature range of between 5
℃
and 40
℃
. A
long battery service life is achieved in this manner.
Observe the notes for disposal.
2. LED FUNCTIONS OF CHARGER AND POWER TOOLS
CHARGER
POWER TOOLS
LED INDICATOR BATTERY PACK RED LED GREEN LED ACTION
On
BATTERY
CHARGING
Charging Charging
BATTERY
FULL
Fully charged
Full
Half
Empty
Off
Off
On
Charging is complete
Maintenance charging
LED INDICATOR YELLOW LED BATTERY PACK RED LED ACTION
On
Off
Off
Need to Charge Off
Off
On
GREEN LED
Off
Off
On
- 5 -
strana
26