Page | 3
6.
Mount the sub belt and route the buckle through the seat pass-
through if available.
7.
While sitting in the seat, latch the lap belt together with the
shoulder straps, sub belt, and lay it flat on across your lap. Pull
the slack out of each lap belt while keeping the latch in the
center of your lap until it is snug.
8.
Sit straight up in the seat and pull the slack out of the shoulder
straps. Make sure the sternum strap is at least 4” below your
neckline. If it is not, adjust the height of your shoulder straps
until the sternum strap is 4” below neckline. After this is done,
check the sub belt and make sure it is tight. If it is not tight,
make adjustment in the slack to ensure it is tight.
9.
Double-check all mounting and hardware before operating the
machine. Make sure the latch link is locked and secured to the
velcro at all times while the vehicle is in motion.
Notes:
Check bolts after every few rides and after any hard impacts to insure bolts
are tight.
Always adjust the harness before EVERY ride according to the rider and before operating the machine.
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D INFOR
MA
TIO
N
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D INFOR
MA
TIO
N
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D INFOR
MA
TIO
N
Tusk 5 Point SFI Approved Safety Harness
INSTA
LLATI
ON INS
TRU
CT
IO
NS A
N
D
INFO
R
MA
TIO
N
