60
Set M Value Warning
You can set the warning to release when nitrogen is accumulated
at the specific % of the M value (no decompression limit) to reduce
the risk to develop decompression illness.
Set the M value (no decompression limit) warning. You can select
% for M value warning as below.
95%
Warning is given with 95% of M value.
90% (default)
Warning is given with 90% of M value.
80%
Warning is given with 80% of M value.
1) Make the mode Plan Mode
Press
P
once in Time mode or Surface Mode.
[PLAN] is displayed and mode will be changed to Plan Mode in
appox. 1 second.
Ref. Mode types and how to switch them…P.19
2) Press
A
for about 2 seconds
When [GAS1] [21 - 100%] are shown after [SET] [Hold] were
blinked. Press
A
3 times to make the display for M value
warning setting.
〈
Default
〉
P
L
P
L
P
L
[Mval] [90%] will be shown as default. If you have changed the
M value %, [Mval] and either [80% or 90% or 95%] are shown.
3) Press
P
or
L
. to set [Mval] and either [80% or 90% or 95%].
To fast forward, keep pressing
P
or
L
.
