manualshive.com logo in svg

Tusa DC-Solar IQ 1204, Руководство пользователя

Поделиться
Скачать
Tusa DC-Solar IQ 1204 Скачать руководство пользователя страница 33

32

 Warnings In Dive

Ascent Rate

Ascending speed is monitored and warning is given 
when ascending speed exceeds than set speed. 
The ascending speed set in this dive computer is 
10m/minutes

• When ascending speed exceeds than 10m/minutes, warning of 

[SLO] is shown in the center of the main display and it will blink 
for 6 seconds. Alarm will be on for 6 seconds.

• When ascending speed becomes OK, warning of [SLO] is off, 

and warning is canceled.

• If the warnings are released 2 times in a row, it will be recorded 

in the dive log.

Warning Of Three Minutes To Decompression

When NDL becomes three minutes, alarm will be 
ON for three seconds and main display will start 
blinking .

Decompression Dive

When No decompression limit (NDL) is exceeded 
in a dive, the warning is given for you to stop for 
decompression. NDL display will change to current 
water depth.

• DECO will be on, and N

2

 indicator and Current depth will blink.

• Alarm will be on for 6 seconds
• After that, decompression dive will be displayed automatically.

Содержание DC-Solar IQ 1204











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды